Archive for the "Erde Trailer Accessories" Category

Erde 143 hard top fitting instructions

Here is a guide to fitting a hard-top cover to an Erde 143 trailer. There are pre drilled holes at each side of the top edge of the rear panel, they may be covered by plastic studs that will need to be removed. Remove all plastic studs even though you will only be using the […]

Erde cycle carrier fitting guide

Here is a guide that will help you fit cycle carriers to an Erde trailer. Please remember that you must have loadbars or a hard-top cover with loadbars installed on your trailer in order to fit cycle carriers. It is also possible to fit these to some car roof racks. Start by slotting these square […]

Load bar fitting guide for an Erde hard-top cover

Here is a guide to fitting load bars on a hard-top cover for an Erde trailer. First of all you will have to reinforce the body panels of your trailer so they can handle the extra weight. The example we are using is an Erde 142, please be aware that this process may vary slightly […]

Erde waterproof high-cover fitting instructions

Erde waterproof high-covers are quite simple to install. Here is a set of fitting instructions to help simplify it further. First of all you should remember that the 102, 122 and 142 are slightly different to the rest of the Erde range. The 143 model trailer and above have black plastic caps covering holes in […]

Erde lightweight jockey wheel fitting instructions

Here is a fitting guide for lightweight Erde jockey wheels. When building a trailer from scratch you may find it easier to fit the jockey wheel while the trailer is upside down. If you are fitting a jockey wheel to a complete trailer, we recommend supporting the towing hitch on something to lift the front […]

Erde cycle carriers

Erde cycle carriers mount on the load bars of your trailer or to the roof rack of your car, providing an excellent way to safely transport bicycles. The cycle’s frame is supported by a padded clamp, while small straps around the rails keep the cycles wheels in place. The clamp that supports the frame has […]

Mesh extension panels and covers for Erde trailers

Erde manufacture mesh extension panels for trailer models 143 and above. These panels work in the same way as regular extension panels, except these are made of wire mesh instead of sheet metal. Erde’s mesh panels are 60cm high and have an optional mesh cover that fastens to the top. Good features of mesh panels […]

Erde 122 hard-top cover fitting instructions

Here is a guide to fitting a hard-top cover to an Erde 122 trailer. First you will need to reinforce the front body panel of your trailer. Take one of the reinforcement plates supplied with the cover, this will need to be slotted under the lip at the top of the front panel. There should […]

Cargo nets for Erde trailers

Cargo nets are a great way of securing loose items inside you trailer at a fraction of the cost of a hard top cover. Erde manufacture a variety of sizes to fit all of their standard trailers in the ‘leisure’ or ‘commercial’ range. Erde cargo nets are made from high quality elastic cord and heavy […]

Erde hard-top trailer loadbars

Erde hard-top loadbars allow you to secure extra items to the top of your trailers hard-top cover. If you have completely filled you trailer and it is still under its recommended gross weight, you can secure additional items such as extra goods, cycle rails and top-boxes to the top of it with a set of […]